Elegoo Saturn 2 magnetic hose adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I couldn't find a suitable mounting system for the Elegoo Saturn 2 exhaust hose, so I created one
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 175
- Wydruki
- 0
- Wyświetlenia
- 1226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello. This is magnetic exhaust hose adapter for Elegoo Saturn 2 printer.
I printed it with PLA+ from eSun and it works fine, no need to be very strong.
It uses 6x3mm magnets becouse i have leftovers from Voron build. They fit tightly so no need for glue but pay attention to polarity of magnets cause you may not be able to remove them.
One version is for M3 nuts and second one is for M3 inserts, choose which you prefer. I printed only one with inserts so be carefull to other with nuts.
The hose comes in with a loose fit so I use a hose clamp and there are different sizes so you can choose whichever fits you
Size indicating the internal diameter of hose.
I am olso including .STEP file if you want to change something