Marked Modular Magnetic Wrench Holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved Magnetic Wrench Storage
- Ocena
- 5 / 5
- Polubienia
- 171
- Pobrania
- 1388
- Wydruki
- 7
- Wyświetlenia
- 6720
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Last Update: 2024-20-03, Updated files for 11/32 SAE Wrench Holder, previously there was a very rarely provided 7/32 SAE Wrench, I have left this in the STL files but removed from the 3D Model Files. I also corrected incorrectly positioned 9/32 SAE Wrench in the lineup/order.
New Files are marked v2
This design utilizes ½" dia x 1/8" thick N42 rare earth magnets the same as the original but also allows for any Generic or N42 6mm x 2mm magnets often used in Gridfinity to be used also.
1/2" Magnets Link: https://www.kjmagnetics.com/proddetail.asp?prod=D82
I have an updated design of these meant for Pliers here:
https://www.printables.com/model/828043-modular-magnetic-plier-holders
---Changelog---
10/24/2024: Corrected issue with 3/8 ½" External Magnet file where on Bambulab Slicer it would show a Body Error, re-made the 3D Model to correct issues and Updated STL, STEP, and F3D Files.
10/16/2024: Corrected issue where ½" Magnet files were described as 2", corrected STL, STEP, and F3D files.