Voron Single-Door 270° Hinge

Here you will find all the printed Parts you need to install a Single Door on a Voron24 or Trident that can be turned completely on its side or removed very easily. I have uploaded the Parts for 3 and 4mm panels with 3mm foam tape each.
For the Door itself I used Extrusion Profilers 20x20 B-Type Nut 6 which I connected with blind joints. The disc (4mm PC) is fixed in the groove with inlet Profiles.
The Washers, Pins and Bushings are best pressed in with a vice. Do not press the Bushings in completely so that some air remains between the plastic parts.

The logo is intended to cover the holes for screwing the handle and can be attached with a drop of glue.

BOM

4             Magnete 6x3
2             Washers M5 x 10 x 1
2             Pins 5x45 https://www.amazon.de/dp/B07YKCKRB7?ref=ppx_yo2ov_dt_b_product_details&th=1 
2             Bushings 5x7x8mm https://www.amazon.de/dp/B07KQ47K86?psc=1&ref=ppx_yo2ov_dt_b_product_details 
6             SHCS 3x14
2             SHCS 3x8
2             BHCS M3x8
Foam-Tape 20x3mm      https://www.amazon.de/dp/B0829RF1FP?ref=ppx_yo2ov_dt_b_product_details&th=1 

Door Voron V2.4 300

2x           Profil 20x20L B-Typ Nut 6   420mm
2x           Profil 20x20L B-Typ Nut 6   480mm
1X           Panel 429x449mm 
2x           Cover and edging profile    420mm https://www.dold-mechatronik.de/Abdeck-Einfassprofil-schwarz-B-Typ-Nut-6-Laenge-05-Meter 
2x           Cover and edging profile    440mm https://www.dold-mechatronik.de/Abdeck-Einfassprofil-schwarz-B-Typ-Nut-6-Laenge-05-Meter

Door Voron Trident 250

2x           Profil 20x20L B-Typ Nut 6  370mm
2x           Profil 20x20L B-Typ Nut 6  500
1X           Panel 429x469mm
2x           Cover and edging profile    370mm https://www.dold-mechatronik.de/Abdeck-Einfassprofil-schwarz-B-Typ-Nut-6-Laenge-05-Meter
2x           Cover and edging profile    460mm https://www.dold-mechatronik.de/Abdeck-Einfassprofil-schwarz-B-Typ-Nut-6-Laenge-05-Meter

If you have any suggestions for improvement, please let me know.