Paper towel holder with swinging arms
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Paper towel holder with swinging arms to accommodate small or jumbo rolls. Large base for 2-sided tape.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Paper towel holder. Designed with swinging longer arms. Suitable even for jumbo rolls.
Base has large surface so can be used - non damaging way - with 2-sided carpet tape. (Base has left and right version as I found this way holding on better.)
Screw-able pin to fix and hold the roll. 4cm diameter collar to center the roll on the pins for just aesthetics.
Arms can be a little hard to push into the base, but even printed with rigid PLA it goes in without breaking. (Probably would not come out again w/o layer separation.)