1 / 3
Paper towel holder with swinging arms — image 1
1 / 3

Paper towel holder with swinging arms

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Paper towel holder with swinging arms to accommodate small or jumbo rolls. Large base for 2-sided tape.

Rating
0 / 5
Likes
5
Downloads
29
Makes
0
Views
180
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — Share Alike

Paper towel holder. Designed with swinging longer arms. Suitable even for jumbo rolls.

Base has large surface so can be used - non damaging way - with 2-sided carpet tape. (Base has left and right version as I found this way holding on better.)

Screw-able pin to fix and hold the roll. 4cm diameter collar to center the roll on the pins for just aesthetics.

 

Arms can be a little hard to push into the base, but even printed with rigid PLA it goes in without breaking. (Probably would not come out again w/o layer separation.)

Tags