Kingroon KLP1 hotend shroud with integrated 5015 duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lightweight replacement shroud and duct for Kingroon KLP1 for use with a standard 5015 fan
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 1278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a lighter-weight replacement for the stock shroud on the KLP1 toolhead, that lets you use a standard form-factor 5015 blower fan (the OEM part has a larger port).
I measured the stock shroud at 80.5 grams, and the replacement printed in ASA with a GDSTIME 5015 blower was 45.5 grams.
The one caveat to using this design is that you need to face overhangs towards the blower duct. Overhangs facing away will not receive effective cooling.
Material: ABS, ASA, or PETG for heat resistance.
Perimeters: 2, to get the bridging to work properly for the duct.
Adhesion: Use a brim to avoid warping if necessary.
Support: Use tree-style supports on the large overhang the 5015 fan fits under, as well as for the upper part of the hotend cooling fan's inlet.
The zip file contains the Build123D python source file (a form of code CAD) so you can tweak the design yourself.
Update 2023-12-05: now has vertical slots for the left side screw holes for slight position adjustability, more clearance for the fan, and a hole for the fan wires to pass through.
Update 2024-02-24: now has a closed duct to increase airflow velocity.