AAA AM4 MN2400 sliding lid battery box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box for four AAA batteries.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Box for four AAA batteries.
I tried other battery boxes but they tended to need a rubber band to hold them together in an overnight bag. This has a sliding lid that grips all round so should be secure. Just enough room for most types to rattle but the spec for AAA batteries allows a little flexibility in size so most batteries will wiggle a little.
Top tip: allow the box and lid to cool completely before sliding the lid in or it'll jam. Otherwise it all works just fine.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
20%
Filament: Prusa PLA Black, flecked
Notes:
Printed using Prusament Galaxy Black PLA. Which I don't like (seems to need 220 hot end if you want the layers to stick). So I use it for stuff where the appearance doesn't matter.
Category: Organization