Liczymy pasujące modele…
I wanted a way to store and ship my cpus i have. The design is inspired by another one from here, but it is 100% my own. There are 5 cpu platforms currently supported. If I will get my hands on others I will upload the designs also. The…
I made this Backplate for AMD AM4 Platform. The Model is like the Original. You can Print this in PETG, but i really recommend any Carbon Fiber Filament, like PETG-CF, PLA-CF or ASA-CF/ABS-CF. The holes dont have a thread, its because if…
Just a CPU protection tray for AMD Ryzen AM4 CPU's Good for storage or shipping! Print Settings Layer height: 0.15mm - 0.20mm Support: None
I printed it with a 0.2mm layer height. The cutouts on the corners of the bottom piece are to grab the CPU: Tested with my Ryzen 7 1700. Moddeled with the help of this Ryzen CPU model: https://grabcad.com/library/amd-ryzen-cpu-2
Case for a safety transport or storage of an AMD CPU. Perfect then u selling CPUs. TIP: Secure the case with a peace of tape for shipping. Hope u Enjoy
These pulleys are designed for chain drive roller blinds. The original pulleys supplied with the blinds often skip steps, are noisy and do not support larger and heavier blinds. Use the pulley corresponding the size and weight of the…
Hook part extended by 5mm on both mounts. Category: Computer
"20th Century Fox" (https://skfb.ly/6W9rH) by toiam408 is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).
Use this to mount AM4/AM5 cooler on your motherboard, if original bracket is missing. Version with 3mm extra beef has hook as large as it can typically fit. Can be a little challenging to install but offers maximum strength. +2mm version…
Uses 4 M3x15mm bolts 4 M3 nuts 4 M3 washers (optional) The backplate has a second version which doesn't require supports and will bridge the overhang instead Consider rotating the retention mount for better strength. That will instead…
Ever needed to safely keep your old AMD CPU? This is a simple, print in place case just for you! I would recommend adding a bit of tape to help keep it shut. Files include STL, STEP, and Autodesk Inventor Part file for editing and…
The model is an adapter for stock AMD am4 cooled to fit onto the LGA2011 style socket. I used mine on the HUANANZHI X99-8MF motherboard. It simply bolts to an Intel socket with four M4 bolts and AMD cooler screws directly to the adapter.…
Edit https://www.thingiverse.com/thing:3080514 for stock fan (wraith stealth cooler) AMD ryzen 5 2600 or other ? Print instructions Unassociated tags: Stock fan amd am4, wratch stealth Category: Computer Summary Edit…
This gear wheel fits perfectly to the chain with 3 mm balls for blinds. When first fitted to the engine shaft, the gear holds very firmly. I recommend that after the first time it is put on, you use a kitchen knife or spatula to pry it up…
A backplate to hold the stock or other compatible CPU cooler for an AM4 motherboard. This design is slightly stronger than the original on Thingiverse, as I made the pegs slightly larger and the hole slightly smaller. DO NOT tighten the…
A small case for storing or transporting AMD AM4 CPUs.
@med145 's wonderful bracket adapter ( https://www.thingiverse.com/thing:2238848 - The attribution field was broken at the time of upload), but, includes the standoffs so that the STOCK backplane + screws can be used, without any sort of…
There are two options, the first is a copy that can be bought for example on Aliexpress, but for my top flow cooler it did not fit, one wall interfered, so in the second version it was removed, but the rigidity of the structure was not…
A minimal adapter to take your Intel LGA 115x socket coolers and put them onto AMD AM4 socket CPUs. For the AM4 side, screw in like normal, on the LGA115x side, use M3 nuts and bolts to secure. DO NOT print this in PLA! PETG or ABS/ASA…
Model Description: Replacement bracket for the AMD AM4 socket. This piece allows you to mount the cooling system (cooler) on motherboards with the AM4 socket, fully compatible with Ryzen processors. The design follows standard dimensions…
AM4 Backplate for Ryzen CPU AMD Motherboards use ABS or other High Temp Material do not print in PLA. You also need some screws depending on your cooler, also use a light one.
ASRock BC250 to AM4 Cooler Adapter Why Does This Exist? I wanted better air cooling for the APU in my ASRock BC250 Steam Machine. The existing AM4 adapters I found did not accurately account for mounting height or the offset processor…
AMD AM4 CPU case using 4 M3 screw (2.5'' inch ssd screw)
I design the holder for Cooler Master Seidon 120v for AMD AM4 sockets because in the Cooler Master store the official adapter is out of stock. I used PET-G but is possible to print with ABS, I don't recommend using PLA Note: I used the…
These brackets are to fit a AM4 CPU fan to fit on a LGA 2011-3 Socket of an X99 Motherboard. The example shows the fan to be an AMD Wraight. In the example pictures I used a Kingroon KP3S Pro V2 to print. Happy printing!
replacement io shield for A520M DS3H Category: Replacement Parts
IO Shield for AMD AM4 Asus PRIME B450M-A Micro ATX Motherboard. Recommend PETG or PCTG.
AM4 thermal paste shield to help with thermal paste application on 1st - 5th gen Ryzen CPUs. Helps make sure that thermal paste doesn't fall on the MOBO. Takes about 13m8s with Bambu Labs printer, and about 40m on Creality CR-10 V2.…
One of the included AM4/AM5 was missing for the packaging, so i mocked up an identical one.
Slightly modified version of another clamshell AM4 CPU case/tray.
If you have a Prusa 3D printer, you probably already have enough square M4 nut s. You need 4 in total. However if you don't have them on hand, the square nuts used are ~6mm width, ~2mm thick. Push them to the slots and they will create a…
If you bought this cooler before AM4 was invented, these 2 parts are the solution, to be able to mount on an AM4 motherboard. Reuse 4 screws from coolers AMD kit, and add 2 M3x16mm screws and 2 locknuts. Printed in PETG 100% filling, and…
Are you someone who has like 5 different be quiet! coolers strewn across your house, with not a single AM4 bracket spacer between them? In that case, this model is PERFECT for you. It's an exact replica of the stock be quiet! spacer, so…
AM4 Retention Bracket for a iCUE H150i ELITE CAPELLIX Liquid CPU Cooler. Corsair has a retention bracket for sell on its web site. It is currently not in stock. So I designed this bracket in blender. 6-32 3/4 Screws is what I used to…
Feast your eyes on this ridiculously detailed 3D model of an AM4 socket. Every freaking pinhole, lever, and notch has been recreated. Consider this a digital masterpiece for display or educational purposes. Attempting to 3D print this…
Since an Alienware laptop has failed me it was time to switch back to self-build computers where I can repair/swap defective components myself. After the MMX video editing hell I knew I needed some more digital horsepower's and decided to…
Description A custom CPU cooler mounting plate and optional backplate stiffener for the ASRock BC-250 . This adapter is specifically designed for the Thermalright AXP120 , but it should work with other CPU coolers that share the same…
Be sure to add a few extra perimimeters to ensure it's strong enough. I've used 3 perimiters on a 0.4 nozzle and it held up fine, should probably use 4 just to be safe though. The mount is for horizontal mounting only. If the cooler is…
I received a Cooler Master Hyper 212 that did not contain the AMD AM4 mounting bracket in the package so I designed & printed this part of my design to secure the radiator to the CPU. Similar to RR-AM4B-212L-R1.
This is a fan shroud to help the CPU fan suck in cold air from the outside, through the side panels. It should just fit through pressure, no mounting hardware or tape needed. I made it for the "Kolink Rocket" mini-ITX pc case with the…
Lost 3 of the 4 AM4 standoffs for my Peerless Assassin CPU cooler, so I replicated it. Based off measurments from my remaining original standoff. May work with other models using the same mounting system, your mileage may vary. Don't…
A simple tray with a lid to hold up to AMD AM4 CPUs. The lid is meant to rest on the tray body, and if you want to secure them together you can use a rubber band or something similar. Tested to print on Elegoo PLA+ and Creality Hyper PLA…
NZXT Kraken X60 AM4-Adapter To use the old watercooling AIO, I had to design a bracket to mount it to an AM4-socket. The original backplate and screws are reused. Use a 7mm drill to widen up the holes until you get a snug fit. printed in…
Fits 14 AM4/AM5 CPU Trays (43 × 12.5 × 49.5 mm) in a single 2×4 Gridfinity box. Recommended Tray: Use the AMD Ryzen AM4 CPU tray by @JATMN from Printables.com for optimal fit and protection. Optimal Viewing: CPUs are tilted at a 30° angle…
Intro I have an old but capable EKWB supremacy copper acetal cpu waterblock, but doesn't have AM4 mounts, only AM3. In the first 3 years of use I used the block modding the AM3 mounting plate like the photo shown, with washers, but was…
An holder for AMD AM4 Ryzen series. STL is positioned yet for printing, Infill 30 0.15 mm Layer PLA
Mount for socket AM4 or AM5 CPUs that combined with acrylic glass sheet shows you the spread of your thermal paste using the same or similar pressure as your cooler mount. Works with the stock mount screws that came with your motherboard.
Box for four AAA batteries. I tried other battery boxes but they tended to need a rubber band to hold them together in an overnight bag. This has a sliding lid that grips all round so should be secure. Just enough room for most types to…
3D printed mounting brackets, originally made to match Tuniq Tower cooler. Nowadays I use them for custom watercooling block mounts. PETG with lots and lots of perimeters. Did I say perimeters? SOLID. Note: you are responsible for…
I originally downloaded a similar model, but it was too tight and could not be used on my backplate. That's why I made my own and allowed for shrinkage after printing when designing. Fits perfectly on my backplate. I recommend printing…
I was unable to purchase an AM4 bracket for my Scythe Ashura so I figured I'd make one.
When I bought a Core II second hand it was missing the required brackets for AM5 motherboard mounting. They aren't available from Cooler Master's spare parts store or as 3d models, so I decided to make them myself! Requires: 4x…
Could get the outer diameter from Ø208mm to Ø222mm. This means a 7mm raise. Two issues to be mentioned: a) The diameter is limited because of the wheel housing (fender) and b) go not too high otherwise the charging won't work. I will…
CPU Cooler bracket for the Thermalright HR-02 for AM4 sockets. Use with care! Almost fried my CPU with it because it deformed. Watch my video about it: https://youtu.be/nzRb4owDffY Category: Office
Corsair H100i AMD CPU socket adapter. AM3 & AM4 *use Intel hardware for mounting (thumb-nuts, standoffs and screws) 28OCT18- Updated the design to allow for the Corsair Link cable to be plugged into the pump...my earlier revision did not…
Made specifically for AMD AM4 CPUs, but may fit others. The CPU pins don't touch the surface. THE LID IS NOT PRINT-IN-PLACE. Print lid separately.
TR4 to AM4 conversion kit for ENERMAX ELC-LTTR240-TBP LiqTech. Best with PET or PETG.
AMD AM4 compatible mount for the old XSPC Delta V3 CPU water cooling block. Any water block with 55mm circular mounting point will work. Can be cut to a different height in your slicer before printing. I used 10mm instead of the model's…
It bothered me that The only orientation I could mount my Hyper T4 on my new Ryzen CPU was with a horizontal fin-stack. So I designed this reinforced bracket to allow you to mount many Cooler Master CPU air coolers with the fin-stack…
Remixed from OGkush standoffs, kept having issues trying to use them myself. print sideways so holes for nuts are facing up. Changes From Original: use 2x square M3 nuts per stand-off, one for the backplate screws, the other holds cooler…
The drip tray consists of two parts, the base, which holds the drips and a grid that sits over the top. After I made and tested it, I think you can skip the grid on the top. There are specific feet locations that the coffee machine sits…
Print with regular settings, 3 perimeters, 0,2mm speed, 0,4mm nozzle, PLA. Careful with the new latch so it does not break when closing the first time.
A motherboard shroud for the (arguably) ugly gigabyte b550 ud ac atx am4. It does require you to remove your gpu and cpu cooler cables But other than that it is quite simple! I am hoping that this model will help shine some light on what…
A CPU case for AM4 AMD CPUs. It features a clip to hold the case shut and a hinge. Tested to print fine with Elegoo PLA+ and Overture PLA Pro, and doesn't require supports. Printed with 0.2mm layer height and 15% infill. Materials…
NZXT Kraken X61 AM4 bracket. 3D printed and working well for me.
Entirely reworked from Unmentioned's work. I made a Raystorm socket that will perfectly snap on the raystorm WB having a 46mm top square size (I can't tell which version it is, but it was originally designed for Intel). Beware some…
I bought an AM43 a year ago. I didn't like the chain drive, so I made a direct drive. It's a lot quieter and the speed is better too. Easy to install, just two 4x40 or 3.5 x 40 mm screws. Printer: Prusa MK3S+ Material: PLA real (Temp: 200…
Intel 478 cooler adapter bracket to allow the installation of AMD am2 to am4 coolers. Mounts with 4 m4 20-25mm screws and nuts. Intel 478 coolers are hard to get, and the ones that are available are junk for the most part, this allows the…
Well, this might be the dumbest (but most useful) print I've ever designed. Long story short, I wanted a 6th Gen iPad in my kitchen to display my Home Assistant Dashboard. Decided I didn't want to put any holes in my wall, nor did I (or…
Storage tray for AMD Socket AM4 CPUS. Nothing fancy, just to keep the pins away from damage. Nothing fancy. Made it for my own use but thought I'd throw it on here
The rubber part of the remote became unusable. Buttons were part of it. This model can be used as buttons replacement.
Printed this so that I could get rid of the ugly wording on the EK Velocity Waterblock that said "Velocity". I used PETG since I feel like this should get rather warm. Will have to see if it stands up to time. Print Settings Printer…
I'm not sure what model this block is since I couldn't find it anywhere on the website. The block(with the stock bracket removed) is somewhere around 50x50mm. Should fit snugly. Print with relatively high infill and 4 shells minimum. Take…
The AMD processors come in a thin plastic carrier that was originally packaged inside a larger cardboard container that also holds the Wraith fan. However the CPUs are often sold without the fan, and the plastic isn't safe to mail without…
Cardan Liliana Multimix Am460
This bracket will allow you to install AM4/AM5 coolers that use the factory mounting brackets to your Socket 478 Motherboard. This will help breathe life back into your retro Pentium 4 systems with a modern cooler. This bracket doesn't…
A compact protective case for AMD AM4 processors. Every AM4 CPU (Athlon, Ryzen 1000 to 5000, G-series APUs, X3D) uses the same 40 × 40 mm package with 1331 pins, so one case fits them all. Built to protect the pins The CPU sits heat…
This is a remix of the base which allows for the use of DIN912 M2 × 8mm screws as the hinge. M3 seemed to be too much, so I went down to 2mm, which fits quite neatly. You can use the original lid from the LTT AM4 CPU Case. The M2 screw…
This is a single-piece AM4 mounting adapter for the Zalman CNPS 9000 / 9005 cooler. It is designed to let these older Zalman coolers be mounted on AMD AM4 motherboards while keeping a mounting method that is close to the original one. The…
I needed a slightly shorter spacer for my cooling solution, so I made this. Its 10mm in outer diameter compared to 9.25mm original has, and is 0.25mm shorter. Since SilentiumPC and Endorfy are the same brand I'm gonna call coolers by…
This model attaches the U shape bracket of the Corsair H100 AIO from LGA 1155 to AM4. Heat resistan filament ir REQUIRED, Such as PC that i have used or similar.
Tired of crazy DDR5 prices? High-end component costs hitting your wallet? It’s time to unleash the true power of the legendary, budget-friendly, and rock-solid Socket AM4 platform! Meet the Open-Hat — a fully open-air custom frame…
Bracket to install Corsair AIO Hydro H60 year 2018 model liquid cooler into AM4 mobo cpu cooler mount. Please use original am4 mobo backplate and imperial sized screws to attach this to the motherboard. I used following insert (…
This is a mount for those who, like me, have lost the AM4 mount and want to attach an old water cooling system to the motherboard. The picture shows only two screws, but don’t worry—it fits four; I just took a photo with two in it.…
PETG ist auf Grund der besseren Belastbarkeit wahrscheinlich die bessere Wahl, aber das ist relativ zum Einsatzzweck zu sehen. Auf den Bildern kommt PLA zum Einsatz. Stützstrukturen sind ehr um die Modelle herum empfohlen, oder wenn…
Print with regular settings, 3 perimeters, 0,2mm speed, 0,4mm nozzle, PLA. Careful with the new latch so it does not break when closing the first time.
The model is an adapter for stock AMD am4 cooled to fit onto the LGA2011 style socket. I used mine on the HUANANZHI X99-8MF motherboard. It simply bolts to an Intel socket with four M4 bolts and AMD cooler screws directly to the adapter.…
LGA2011-3 to AM4 bracket mount. Suitable for stock AMD coolers. PLA may melt, use ABS, PetG, or other high temperature plastics. 100% infill is appreciated (3+ perimeters). Model is high loaded.
V1 whole model of Shamad, a Seastream43' ketch. more details to come.
I remixed the model to include a hole large enough for filament to be used in place of a finishing nail.
This is a Bracket for to use UNIVERSAL AM4 water cooler blocks, especially EKWB, Corsair and NZXT and other generic models with AM5 motherboard. So, you can use your old water cooler and don't have to buy a new one!
Modified to fit on the NH-L9a-AM4NH-L9a-AM4 cooler increasing the height of the duct to fit flush with a S300 Mini-ITX Case. The height is now 20mm Temps improved by almost 10 degrees as you can see in the photos. Machine: Ender 2 Pro…
Many of these older OEM coolers are perfectly fine for cooling most modern CPUs on the AM4 and AM5 platform, I'm sure you have at least one of these lying around somewhere if you've ever played with older hardware. In my case it applies…
Printed in PLA with tree supports (they may or may not be necessary) with the hole facing upwards. This works on ball chains of the same dimensions as the original, I just couldn't for the life of me get that one to fit onto the metal bar…
LGA 775 to AM4 cooler adapter. For the best thermal resistance, print it in at least PETG. Be careful with the tightening pressure! The bracket is not that flexible, and you can damage the motherboard if it's too tight! You need 4 M3 20mm…
