AM4 Bracket Adapter for Corsair AIO CPU Liquid Cooler Heatsink - USES EXISTING AM4 BACKPLANE & SCREWS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
@med145 's wonderful bracket adapter (https://www.thingiverse.com/thing:2238848 - The attribution field was broken at…
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 351
- Wydruki
- 1
- Wyświetlenia
- 2103
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
@med145 's wonderful bracket adapter (https://www.thingiverse.com/thing:2238848 - The attribution field was broken at the time of upload), but, includes the standoffs so that the STOCK backplane + screws can be used, without any sort of standoff inbetween.
The "please resize this" comments on @med145's print have been incorporated into the model, so this should be plug and play. The screws should sink into the holes, and grab the backplane threads perfectly, and keep the CPU nice and cool.
I'm using this with a Corsair H50 from 2017, but other models are likely extremely similar.
NOTE: Please re-download if you downloaded prior to 10/19/2020 @ 9:28AM MST; The file I uploaded was the wrong one. xD
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.32
Infill:
100%
Filament: COEX PLA Clearish Mystery Blue
Notes:
I used PLA. If your case gets hot, then you should reconsider your li---I mean, then try something stronger like PETG or PLA+. So far so good for me.
The "supports" are ONLY for the hollow leg holes to be supported nicely for where the screw will end up going. They are easily removed afterwards.Category: Computer