1 / 5
Zalman CNPS 9500 / 9700 AM4 Mounting Adapter — zdjęcie 1
1 / 5

Zalman CNPS 9500 / 9700 AM4 Mounting Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Reinforced AM4 mounting adapter for Zalman CNPS 9000/9005 coolers, compatible with the original metal retention clip.

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
53
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

This is a single-piece AM4 mounting adapter for the Zalman CNPS 9000 / 9005 cooler.

It is designed to let these older Zalman coolers be mounted on AMD AM4 motherboards while keeping a mounting method that is close to the original one.

The adapter includes:

  • the AM4 mounting holes for fixing it to the motherboard,

  • integrated nut slots to hold the small nuts in place,

  • the mounting points needed to attach the cooler,

  • and, most importantly, support for using the original metal retention bracket from the Zalman cooler.

This is the main difference compared to the original model by another user:
I modified the design so that the original metal piece that holds the cooler in place can still be used and screwed directly to the adapter.

That makes the installation more practical and keeps the mounting solution closer to the original Zalman design.

Notes

Supports are required because of the recessed areas and internal overhangs.

However, it is recommended to use support blockers around the nut slots. Avoid generating support material inside these cavities, as it may be difficult to remove and could damage or alter the dimensions of the slots.

  • Layer height: 0.20 mm

  • Infill: 50% minimum

  • Infill pattern: Honeycomb

  • Walls/perimeters: At least 5

  • Top and bottom layers: At least 5

  • Supports: Required

  • Recommended material: PETG, ABS, ASA, or another heat-resistant material

Tagi