Zalman CNPS 9500 / 9700 AM4 Mounting Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reinforced AM4 mounting adapter for Zalman CNPS 9000/9005 coolers, compatible with the original metal retention clip.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
This is a single-piece AM4 mounting adapter for the Zalman CNPS 9000 / 9005 cooler.
It is designed to let these older Zalman coolers be mounted on AMD AM4 motherboards while keeping a mounting method that is close to the original one.
The adapter includes:
the AM4 mounting holes for fixing it to the motherboard,
integrated nut slots to hold the small nuts in place,
the mounting points needed to attach the cooler,
and, most importantly, support for using the original metal retention bracket from the Zalman cooler.
This is the main difference compared to the original model by another user:
I modified the design so that the original metal piece that holds the cooler in place can still be used and screwed directly to the adapter.
That makes the installation more practical and keeps the mounting solution closer to the original Zalman design.
Notes
Supports are required because of the recessed areas and internal overhangs.
However, it is recommended to use support blockers around the nut slots. Avoid generating support material inside these cavities, as it may be difficult to remove and could damage or alter the dimensions of the slots.
Layer height: 0.20 mm
Infill: 50% minimum
Infill pattern: Honeycomb
Walls/perimeters: At least 5
Top and bottom layers: At least 5
Supports: Required
Recommended material: PETG, ABS, ASA, or another heat-resistant material
