VORON Trident Stealth Skirts - Cheese Grater & Honeycomb Version 250 / 300 / 350
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As I like those skirts on my V0, I've adopted them for the VORON Trident 250 / 300 / 350
- Ocena
- 5 / 5
- Polubienia
- 371
- Pobrania
- 1409
- Wydruki
- 6
- Wyświetlenia
- 10 342
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
UPDATE 05.05.2024:
- Die CAD Dateien wurden auf den aktuellen Stand gebracht.
- Die seitlichen Fan Cover, sowie der entsprechenden Fan Mount wurden minimal angepasst, da es hin und wieder Probleme mit den Lochabständen gab.
- Der Displaymount für das PiTFT50 V2 / V2.1 wurden ergänzt
- Der hintere Skirt der Power Inlets wurde um die Filtered Version ergänzt.
UPDATE 15.03.2024:
Nach dem Youtube Livestream und dem Feedback von Alan Mandic @ Mandic Labs , habe ich die gewünschten Durchgangslöcher für den Inbusschlüssel hinzugefügt! Es betrifft die beiden vorderen Druckteile links und rechts und die hinteren Druckteile ebenfalls links und rechts! Alle anderen Druckteile sollten mit dem Inbusschlüssel einigermaßen erreichbar sein. Für alle, die keine zusätzlichen Löcher in den Druckteilen haben wollen, lasse ich die originalen Druckteile auch drin.
UPDATE 08.01.2024:
- Anpassung des VORON Inlays an der Front, da dieses ggf. zu breit war. Neue Datei = [a]_Voron Inlay Smaller_X2
- Ergänzung des Display Bezel ohne VORON Logo
- Überarbeitung der vorderen linken und rechten Ecke, so dass diese beim Mehrfarbendruck in der Hauptfarbe der Skirts bleiben
- Bodenscharniere & Clips neu hochgeladen, da diese fehlerhaft exportiert wurden
UPDATE 09.12.2023: Jetzt für alle 3 VORON Trident Größen!
Stealth Skirts für VORON Trident 250 / 300 / 350

Da mir die Stealth Skirts von Maverick an meinem VORON V0 sehr gut gefallen, habe ich mir die Arbeit gemacht und diese für den VORON Trident in den Größen 250, 300 und 350 umgezeichnet. Ein passendes Displaymount von “Ken226” konnte ich ebenfalls als Basis für die Front verwenden. Hier ist nun dieser 5inch DSI Touchscreen verbaut und das ganze wurde um passende Skirts links und rechts ergänzt.
In einem Twitch Stream von CHAOSDRUCKER bin ich auf seine “Cheese Grater” Variante für die Trident Standard Skirts aufmerksam geworden und habe diese Idee in meine Variante mit einfließen lassen. Die klassischen Stealth Skirts im Wabendesign ohne das kleine Muster sind aber ebenfalls enthalten. Wenn ihr die Cheese Grater Version in 3 Farben drucken möchtet, ist ein Farbwechsel bei 2.2mm und 4.2mm Höhe nötig.
Diese Skirts sind ebenfalls kompatibel mit dem “Inverted Electronics” Mod von Logan Fraser und die Bodenplatte kann verbaut werden. Ich habe die DIN Mounts etwas Breiter gemacht um eine größere Auflagefläche des Panels zu erhalten. Die Dateien haben ein [optional] im Dateinamen und müssen nicht für die Skirts verbaut werden.
Wenn ich dem einen oder anderen mit meiner Arbeit helfen könnte, würde ich mich ebenfalls sehr über einen Kaffee freuen.
https://www.buymeacoffee.com/printstructor
English Version:
UPDATE 05.05.2024:
- The CAD files have been brought up to date.
- The side fan covers and the corresponding fan mount have been minimally adjusted, as there were occasional problems with the hole spacing.
- The display mount for the PiTFT50 V2 / V2.1 has been added
- The filtered power inlet version has been added to the rear skirts.
UPDATE 15.03.2024:
After the Youtube livestream and feedback from Alan Mandic @ Mandic Labs, I added the desired passthrough holes for the hex key to the files! It relates to the front two print parts left and right and the rear print parts also left and right! All other print parts should be reasonably reachable with the hex key. For all of you who don't want additional holes in the print parts I will leave the original print parts in as well.
UPDATE 08.01.2024:
- Adjustment of the VORON inlay at the front, as it may have been too broad. New file = [a]_Voron Inlay Smaller_X2
- Addition of the display bezel without VORON logo
- Revision of the front left and right corners so that they remain in the main color of the skirts in multi-color printing
- Bottom hinges & clips re-uploaded, as these were exported incorrectly
As I really like the stealth skirts from Maverick on my VORON V0, I did the work and redesigned them for the VORON Trident 250, 300 and 350. I was also able to use a suitable display mount from "Ken226" as a basis for the front. This 5inch DSI touchscreen is now installed here and the whole thing has been supplemented with matching skirts on the left and right.
In a Twitch stream by CHAOSDRUCKER I became aware of his "Cheese Grater" variant for the Trident Standard Skirts and integrated this idea into my model. The classic stealth skirts in a honeycomb design without the small pattern are also included. If you want a to print the cheese grater version with 3 colors, you have to change the filament at 2.2mm and 4.2mm height.
These skirts are also compatible with the " inverted electronics" mod from Logan Fraser and the base plate can be installed. I made the DIN mounts a little wider to get a larger contact surface for the panel. The files have an [optional] in the file name and do not have to be installed for the skirts.
If I could help one or the other with my work, I would also be very happy about a coffee.
https://www.buymeacoffee.com/printstructor