XT60 to 1.5mm² cable cover, housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cover allows esthetically connect XT60 on the same way as it done in regular AC socket plug.
- Ocena
- 0 / 5
- Polubienia
- 110
- Pobrania
- 372
- Wydruki
- 1
- Wyświetlenia
- 1819
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
XT60 to 1.5mm² cable case, housing, cover
XT60 is often used as general purpose connector for low power devices and sometimes needed to connect XT60 to regular PVC 2pin 1.5 mm^2 cable.
This adapter allows esthetically connect XT60 on the same way as it done in regular AC socket plug.
- Cable type recommended: flat 2 wire 1.5mm² PVC cable.
- Max current recommended: below 5A.
- Connector type recommended: XT60, non-genuine.
- Screw type recommended: M3 nut + M3 screw 10mm length.
- Glue type recommended: Akfix 705.
As case designed to 1.5mm² cable, it's not recommended to push much current through it. Applicable for low power devices, with consumption below 5A.
Not compatible with genuine XT60U connectors, only with cheap ones.
Better to use some glue to additionally secure XT60 and cable inside case.