Current Design Respond Pad Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for rectangular Respond Pads botton box from Current Design
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution
Introduction
Hereby my design of a holder for the rectangular Respond Pads buttom box from the company Current Design.
The idea of the design is to glue one or two of these holders on the wall/cabinet/MRI scanner to relieve the strain on the fibreoptic cables from the button boxes
Our MRI facility uses the “8 button Bimanual Curved Lines” button boxes and the holder was designed with these in mind.
The model should also work for the other rectangular button boxes Current Design sells.
The buttons of the button boxes should not foul on the holder.
Instructions:
The design comes in two parts:
- Button box holder.STL
- Text button box.STL
The model “Button Box Holder” contains the actual holder, the “Text Button Box” can be printed in another colour then the button box holder.
Implementing the text neatly will require some trial and error, depending on your printer and materials. The text can be glued in the recess of the holder
I printed the text in white on a black raft to give the letters some stability. (see images)
Hopefully this design could be of any purpose for your institute or facility.
Also, see my other designs for MRI and non-MRI related models!