1 / 7
UNIFI U6-IW Standalone (U6+ Compatible) — zdjęcie 1
1 / 7

UNIFI U6-IW Standalone (U6+ Compatible)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I needed to rest the access point on top of a piece of furniture but couldn't find anything I liked. So I made one.

Ocena
0 / 5
Polubienia
5
Pobrania
50
Wydruki
0
Wyświetlenia
635
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

I needed to rest the access point on top of a piece of furniture but couldn't find anything I liked. So I decided to give it a try.

For the mounting screws, I used the ones that came with the access point, which is why they are too long. I will see if I can replace them with something shorter and with a bolt at the back.

I hope it holds up because the temperature this device reaches is high and I'm afraid it might make the PLA flexible and bend under its weight. PETG is preferred.

UPDATE 11/11/2023:

I found that it is also compatible with the new U6+ (The former Lite), not 100% but using only 2 out of 4 screws, mounted slightly rotated (see photo) to accomodate ethernet cable.

Print Settings

Printer:

FlyingBear Ghost 6

Rafts: 

Doesn't Matter

Supports:

No

Resolution: 

0.2

Infill:

10%

Filament:

PETG Whatever color you like


Notes:

PLA will bend due to heat, use PETG/ASA/ABS

Tagi