UNIFI U6-IW Standalone (U6+ Compatible)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed to rest the access point on top of a piece of furniture but couldn't find anything I liked. So I made one.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 50
- Makes
- 0
- Views
- 635
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I needed to rest the access point on top of a piece of furniture but couldn't find anything I liked. So I decided to give it a try.
For the mounting screws, I used the ones that came with the access point, which is why they are too long. I will see if I can replace them with something shorter and with a bolt at the back.
I hope it holds up because the temperature this device reaches is high and I'm afraid it might make the PLA flexible and bend under its weight. PETG is preferred.
UPDATE 11/11/2023:
I found that it is also compatible with the new U6+ (The former Lite), not 100% but using only 2 out of 4 screws, mounted slightly rotated (see photo) to accomodate ethernet cable.
Print Settings
Printer:
FlyingBear Ghost 6
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
10%
Filament:
PETG Whatever color you like
Notes:
PLA will bend due to heat, use PETG/ASA/ABS