Logitech C270 Mount for 2020 Extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount for a Logitech C270 camera that mounts to 2020 extrusion, as found on a Voron Trident or 2.4 printer.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 167
- Wydruki
- 0
- Wyświetlenia
- 881
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a super simple camera mount that I made to bolt to the 2020 extrusion so I could mount a Logitech C270 webcam outside the enclosure of my Voron Trident.
This design only requires one M3x20 bolt for the camera and one M3x8 and hammerhead nut to mount to the extrusion.
It is not tilt adjustable so the camera shouldn't wander over time. The mount has enough clearance to clear the panels on my build and doesn't require that the camera is removed to remove the panel.
I printed this from PLA with the usual Voron part settings, but that's probably overkill. It does need a single organic support for the counterbore on the 2020 mounting side.