Candle Holder with Self-extinguishing feature Experiment!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Candle holder that can be filled with water to extinguish the flame at the bottom!
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 85
- Wydruki
- 1
- Wyświetlenia
- 1391
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently designed a candle holder and had difficulty finding a suitable material for it, as almost any material will ignite in combination with the wax.
But before I ordered expensive special filaments, I first thought about how I could reduce the risk with self-printed parts through the design!
Here is my solution and the comparison to a candle holder without design optimization! :D
Simply print the holder and insert a candle! (You can use the candle sharpener I designed for a perfect fit!)
Disclaimer:
Never leave burning candles alone! I've only had good experiences with this design so far, but fire always carries a residual risk! Water can also evaporate if left for a long time.
This concept is primarily designed so that you can light a candle and don't have to constantly check whether it has burned too low or not! Nevertheless, always keep an eye on it :)
Have fun!