Gamedore 2064
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handheld game console for retro gaming. Powered by Raspberry Pi Zero (1 or 2), 3.5" display, Pico based controls.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 637
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Handheld gaming console inspired by Commodore 64. Device is meant to be powered by Raspberry Pi (1 or 2) and Raspberry Pico for providing controls (d-pad and buttons) as USB-HID device.
Check out the blog post from here:
Handheld from 80s that we never had - Gamedore 2064 (codeof.me)
Bill of material
I used the following components inside the device
- Raspberry Pi Zero with RetroPie distro
- Raspberry Pi 3.5" display with 480x320 resolution
- Raspberry Pi Pico as USB-HID device connected to:
- D-pad component (https://www.aliexpress.com/item/4000681560472.html)
- 6 silent buttons (https://www.aliexpress.com/item/32653516999.html)
- Custom micro-USB to micro-USB (Pico to Zero) cable with these connectors (https://www.aliexpress.com/item/32992732747.html)
- 18650 battery shield (https://www.aliexpress.com/item/1005005993379022.html)
- I desoldered the large USB port from the board to save some space
- Small 3mm led to act as power/activity indicator
Build Instructions
3D printable components:
- The case consists of four larger pieces (front, front led panel, back plate and back cover
- 6 push buttons
- One directional D-pad
All models can be printed without support.
Components can be attached together with various M2 screws.
The buttons and D-pad will snap fit into place. Superglue could be used to secure those (at least the D-pad might need this).