Gamedore 2064
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handheld game console for retro gaming. Powered by Raspberry Pi Zero (1 or 2), 3.5" display, Pico based controls.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 53
- Makes
- 1
- Views
- 637
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
Handheld gaming console inspired by Commodore 64. Device is meant to be powered by Raspberry Pi (1 or 2) and Raspberry Pico for providing controls (d-pad and buttons) as USB-HID device.
Check out the blog post from here:
Handheld from 80s that we never had - Gamedore 2064 (codeof.me)
Bill of material
I used the following components inside the device
- Raspberry Pi Zero with RetroPie distro
- Raspberry Pi 3.5" display with 480x320 resolution
- Raspberry Pi Pico as USB-HID device connected to:
- D-pad component (https://www.aliexpress.com/item/4000681560472.html)
- 6 silent buttons (https://www.aliexpress.com/item/32653516999.html)
- Custom micro-USB to micro-USB (Pico to Zero) cable with these connectors (https://www.aliexpress.com/item/32992732747.html)
- 18650 battery shield (https://www.aliexpress.com/item/1005005993379022.html)
- I desoldered the large USB port from the board to save some space
- Small 3mm led to act as power/activity indicator
Build Instructions
3D printable components:
- The case consists of four larger pieces (front, front led panel, back plate and back cover
- 6 push buttons
- One directional D-pad
All models can be printed without support.
Components can be attached together with various M2 screws.
The buttons and D-pad will snap fit into place. Superglue could be used to secure those (at least the D-pad might need this).