Raymarine Dragonfly 4 Transducer - Scotty Mount for small boat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scotty mount for Raymarine Dragonfly 4 Pro Transducer
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 950
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a transducer holder that lets you put a fish finder on a small boat using only a Scotty mount as the way to secure the transducer to the boat. The print includes the top (scotty adapter) and the bottom (transducer pivot holder). The two get connected with a cut-to-length standard sized wooden closet pole.
Print the .3mf as bedded, includes supports. The supports give the best result to get a clean scotty rod holder mount fit. Once printed, you can put it together. Holes provided for screws to hold the plastic prints to the wooden pole securely.
Once all together, you can mount your transducer securely, a couple of zip ties to hold the wires up the pole. Then when you go fishing, pop the transducer into the scotty mount conveniently located on the back of your boat for the purpose, route the wire to the fishfinder head that mounts on another scotty mount (separate print that I posted earlier), hook up the battery and you are ready to go fishing on your small boat.
When finished, all of the fishfinder components pop off of the boat and can be stowed securely so you can put your small boat into the back of your truck without any damage to your electronics.
Fish Finder head and AGM battery holder for your Walker Bay 8 dinghy are posted separately here.