Liczymy pasujące modele…
This is a transducer holder that lets you put a fish finder on a small boat using only a Scotty mount as the way to secure the transducer to the boat. The print includes the top (scotty adapter) and the bottom (transducer pivot holder).…
Raymarine Dragonfly 4 Pro mount that adapts the fish finder display to sit in a Scotty mount. Print in PETG, 30% infill, with supports (gives best outcome) Allows you to mount a Dragonfly 4 Fish Finder/GPS to a Scotty mount. This piece is…
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
Rod holder base/dock. Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No Supports: Yes Resolution: .200 is what I used. Infill: 65% is what I used. Notes: I only used supports for the square locking lug inside the shaft…
Here is a model that fits into Scotty Rod Holder mount. Now You can design whatever You like on top, and model Your own custom accessory for the boat, kayak, belly boat etc…
A remix of the Every iPhone STL & Adjustable f3d File | ScottYu-Jan & OVERWERK model by @Marlfox_1264389 , but this time with only the phone charger portion. Also adjusted the tolerance of the magsafe portion to be a tight interference…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Thanks to the amazing work of ScottYu-Jan and OVERWERK we have a cool stand for the iPhone. Marlfox did an amazing job by using parameters in Fusion to be able to adjust the size. What i did here is just figuring out the best size for the…
I added the Scotty Mount male end from https://www.thingiverse.com/thing:793219 the the Swill Saver gimbaled drink holder. The stl has the drink holder scaled up by 2% to increase the can size. The Scotty Mount is scaled to 97.5% and is…
Things changed: Increased depth of phone slot to make case flush with dock Chanced length and with of dock for 12 pro max with 2mm tolerance for case (dimensions in screenshot)
I wanted to add a simple cover for the dock, so I did. While I was at it, I made a few small changes, like ensuring there were no angles over 60° to make it a little bit more printer-friendly (though it already was). I also tightened up…
Kayak phone holder mount to go in a Scotty fishing pole holder mount. Settings are set for an iPhone 13. Edit parameters in Fusion 360 file to adjust phone size, mount height, and angle. Print rod standing straight up (without supports is…
I purchased a paddle board that came with a Scotty mount location, since I didn't have much use for a fishing pole holder I modeled up this cupholder to use instead to keep my beverage secure on the board. Sizing is designed to firmly…
This is an interface between a RAM mount ball (1 inch) and a Scotty male end. I have modified the neck a bit thicker than the photo shows. Please "like" this file if you collect or download it. Print Settings Printer Brand: MakerBot…
I wanted a compact, low profile, camera adapter for my kayak. I modeled this up to based on Prestonf's Scotty male end adapter. It seems like it'll fit my needs perfectly. Print this part with no support material. The main Scotty adapter…
I created this remix so that I could have a place to attach my transducer arm without taking up an entire mount location on an inflatable skiff. I happened to have a Scotty 141 transducer mount so I remixed the linked model to use the…
I made this mount for 2 light pods to fit in my scotty rod holder base. hollowed out in the middle to feed wires through with a dt style plug for removablilty. i printed it in petg seems plenty strong enough. i used auxbeam Pro series 3"…
Fit well into a purchased Holder. Might be slightly looser fit to slide vertically then the rod holder but snug and no play when seated. Printed PETG, 25% infill and 0.2mm layer height Printed to use as a Base Ball to attach My IPilot…
The Sandlot - Scott Scotty Smalls (Tom Guiry) - 1993 3D printable model.
I created this remix so that I could have a place to attach my transducer arm without taking up an entire mount location on an inflatable skiff. I happened to have a Scotty 141 transducer mount so I took the gear head adapter off of it.…
Works seamlessly with Scottyujan design, requiring glue to connect the two parts securely. Achieves a perfect fit with both iPad 7th and 9th gen models.Experience a sleek and functional design that complements your iPad seamlessly.…
Adapter for echo sounder or other accessories the original Fasten adapter is still required to Scotty 1,5"
This is a re-creation of the Scotty 441 Backing Plate. It is used to add structure behind 241/244 4-bolt mounts on thin-walled vessels. You can also use it as a spacer, which is what I use it for. Printing Recommendations: Print with ASA…
I drew a holder for a Scotty holder for my Native Watercraft. In order not to drill into my kayak, I drew a holder to mount the Scotty holder on my Slayer 10. The nuts of the holder are Ruthex melt-melt nuts M6. It is screwed into the…
Printed with PCTG .6 nozzle with .42 layer height. Built for my clamping downrigger, but have used for any devise that can clamp onto a block. I am guessing this would work with PLA (maybe white so it does not warp in sun) and PETG (which…
This is a plug for a Scotty flush mount. I designed this to fill the gaping hole left in the bottom to reduce any water intrusion into my fishing kayak. I used a little gorilla super glue to hold it in but it will snap in. there is a…
Found this dock but discovered that it fit so well that the side buttons were registering as being pressed. I simply added cutouts for the power and volume buttons so they wouldn't get pressed.
Storage solution for scotty mount products for boating and kayaking and fishing with the gladiator gear track slatwall system. I used it to store my crab pulley for my kayak. print on its side with support. I printed mine in ASA for…
For Scotty No. 241 Combination Side/Deck Mount 2.094" Tall 5 Perimeters, 5 Top & Bottom layers, 100% infill Anchor Mount https://smile.amazon.com/gp/product/B001M4HTNY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Print Settings Printer…
This is a handy fishing storage aid for your boat. If you are using a drop weight / snap-on weight and a paddle flasher, you will love this add-on. Holds your bait, ball and flasher securely while you transit. Cut-outs also hold two…
Two piece locking block adapter for a Sportspal or Raddison Canoe. Thwart measured at 31.6MM check yours prior if you have any doubts between generations of Canoe. required hardware for fastening 4 - 1/4" x 1-1/2" bolt set. (found my…
This is my take on Scotty from Star Trek: The Original Series. You may need to rescale this design to fit your needs.
This is an awesome stand. One of the better ones out there. I decided to add a little SciFi spin to it.
This is a mounting block for battery powered running lights which mount into a Scotty mount system. There's a small loop on the block for a lanyard. This could be used as a general mounting block as well. I printed it in PETG as it will…
Vše bylo přesné. Jen malé nabíjení mělo malou tloušťku a tak jsem vytvořil klín na vytěsnění, aby byl co nejblíže povrchu. dále jsem udělal TPU průchodku zadní části pro dva kabely. Průchodku jsem rozřízl na dvě části ve sliceru a bez…
Printed at .28 with supports....Will need to add a bolt through the middle to help stiffen it....I think it is 2in 5/16 washer and Lock Nut....
kleine Wanne zum unterlegen für den Scotty Grill, die einfacher zu reinigen ist
This is to attach a torch to a scotty mount, for using on a boat for example. The circular area is for a male scotty mount to be bonded on, and the torch is affixed with some shock cord which is fed through the holes.
Each letter can be printed individually and then assembled using super glue. The parts are designed and scaled so that the holes align perfectly when joined together. For printing, I scaled the STL files down to 80% and used 10% infill,…
A trophy for the cycling fan in your life. Celebrate those Ride Ons and climbs up the Alpe.
This is my take on Scotty from Star Trek: The Original Series. You may need to rescale this design to fit your needs.
The Sandlot - Scott Scotty Smalls (Tom Guiry) - 1993 3D printable model.
I bring you my iteration of a smoke stand, equipped to hold your grinder, room for 4 pre rolls, or storage for freshly rolled, (can also fit cig for spiff smokers) Storage for two lighters (because ones always out of fluid) Storage for…
