Smittybilt Bumpers for 3DSets RC Jeep Rancher (Wrangler)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternative version of the bumpers for the RC Rancher model by 3DSets.
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 266
- Wydruki
- 3
- Wyświetlenia
- 1223
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I wanted the same bumpers as my Jeep Wrangler, so I re-diesigned the originals from 3DSets.
I also customized the winch, winch hawse, a stronger winch drum and the D-Rings. Printed with Overture Matte PLA with 80% infill and 0,10 layer. In the pictures you can find the best way of orientation for printing.
IMPORTANT: in order to mount the front bumper, you need to print also the modified Front Frame End.
DISCLAIMER: Those aren't easy parts to print, please make sure that your printer is very well calibrated and take your time to edit your slicer to make good prints!