NR200P ATX PSU Mount - Optimised
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount to allow an ATX PSU to be used in the NR200P case.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 201
- Wydruki
- 0
- Wyświetlenia
- 967
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
"A mount to allow an ATX PSU to be used in the NR200P case. This holds the power supply at the front of the case in front of the graphics card with space to allow the front panel IO cables through.
It's based on the one you can download direct from the Cooler Master product page but gives a little more room for the graphics card. I'm using it with 242mm long card and there's a couple of mm left to spare. It's a 160mm power supply and there's still enough space for the cables under it. By splitting it in two there's still room to pass the front panel IO connectors above the power supply and there's a notch for the HD Audio connector. It's in the lower position so there's room for both top case fans."
From the original creator.