Yet another TUSH v2 - one piece with printed axles and spool guides
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesign of my one-piece TUSH with guiding rims - now using less material, printing faster, even better stability
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Redesign of my other TUSH using less material and printing faster but nevertheless giving improved stability.
Print the guiding rims and axles with 5 walls and 50% infill and a brim for the axles.
For a whole set of two spoolholders, print
- 2x base
- 4x axle
- 4x rim
The rims and axles should be a tight fit, but not need excessive force to be pushed over the bearings re. into the base and bearing. If in doubt, print a sample rim & axle to test the assembly.
The axles could be replaced with four M8x20 screws and nuts if you are not comfortable with them. I have used the TUSH with printed axles with 2.5 kg spools without any issues.
BOM:
- 4x bearings 608ZZ, e.g. from Amazon: https://amzn.to/3ZtLnap (affiliate link)
Filament used
- Extrudr PLA NX2 black https://www.extrudr.com/de/produkte/catalogue/pla-nx2-schwarz_1966/
- Extrudr PLA NX2 silver https://www.extrudr.com/de/produkte/catalogue/pla-nx2-silber_1972/