Yet another TUSH v2 - one piece with printed axles and spool guides
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Redesign of my one-piece TUSH with guiding rims - now using less material, printing faster, even better stability
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Redesign of my other TUSH using less material and printing faster but nevertheless giving improved stability.
Print the guiding rims and axles with 5 walls and 50% infill and a brim for the axles.

For a whole set of two spoolholders, print
- 2x base
- 4x axle
- 4x rim
The rims and axles should be a tight fit, but not need excessive force to be pushed over the bearings re. into the base and bearing. If in doubt, print a sample rim & axle to test the assembly.

The axles could be replaced with four M8x20 screws and nuts if you are not comfortable with them. I have used the TUSH with printed axles with 2.5 kg spools without any issues.

BOM:
- 4x bearings 608ZZ, e.g. from Amazon: https://amzn.to/3ZtLnap (affiliate link)
Filament used
- Extrudr PLA NX2 black https://www.extrudr.com/de/produkte/catalogue/pla-nx2-schwarz_1966/
- Extrudr PLA NX2 silver https://www.extrudr.com/de/produkte/catalogue/pla-nx2-silber_1972/
