124 models
DEUTSCH: Inspiriert vom Ultimate Spool Holder von TUSH. Meine Version des Ultimate Spoolholders für Prusa MK3 Drucker. Zusammengebaut mit den Original MK3 Ersatzschrauben. Lager 608 für Inline-Skates. Kann am Drucker oder als Tischständer…
You know what Thingiverse really needs? Another spool holder! TUSH FT: FatTracks Edition TUSH-style spool rollers are great if you lay filament on a flat surface: Very compact and lightweight Universal (no adjustment needed) and quick to…
The MK3S's stock spool holder works actually really well. Yet, I like spongybob1958's TUSH2 design and use this kind of spool holder with all my other printers, so I remixed it for the MK3S. In reality, it's more of a reimplementation in…
TUSH style spool roller for Eibos new filament dryer, by default it only has a center spool holder than was not allowing my spool to spin smoothly. Tested with SUNLU style spools only. WILL NOT WORK WORK WITH SPOOLS WITH A SMALL INNER…
Reupload of the TUSH ultimate spool holder. "Introducing TUSH - The Ultimate Spool Holder v.2. I was using a regular spool holder. Not the most convenient design, if you ask me, because It takes some time to replace the roll. Also, based…
This is a one piece version of Tush. Bearings (608's) are pushed up through the holes in the bottom of the bracket and then they snap in place. It takes a little concentration to get them snapped into the center of the bearing. They snap…
I really like the spool holder design from filamentry but the only problem I have is that sometimes the spool holders collapse. Thats why I designed this version with one or two bars between two holders. You need four TUSH_Bee_side and…
UPDATE_FIX 27.12.20 Leider ist mir beim erstellen in der Länge des "NEW_Adapter_for_V2+" ein Fehler unterlaufen, dieser wurde behoben. Die neue Datei ist ab sofort verfügbar unter dem selben Namen. Entschuldigung an alle die es bereits…
DRYBOX are nice, but there is a lot of force on the extruder to unwind the filament, and it caused me a lot of failed print. I modified TUSH - The Ultimate Spool Holder, to fit into the DRYBOX offered by Ondřej Stříteský, the spools…
Made a quick little stabiler for the TUSH spool holder made by filamentry as I was fed up of knocking them over! Can be scaled down 1% if you want a very tight friction fit (ymmv) or print at 100% and add a dab of glue.
I like the TUSH2 spool holder design but found the included spool holder too flimsy and tight-fitting for some spools. Broke 3 prints within minutes trying to squeeze them into the holes of the base. So I quickly drew up something that…
I really love the very simple design of the original TUSH Spool Holder, so I did just a very slight change to the design. Now you can simply attach it to the Top of the Printer, and it´s still just as simple as the original design. Print…
After trying several filament drybox designs from multi-spool to single spool containers, I found several short comings which are addressed with this design Many filament roller solutions caused friction where the filament roll was…
I found this TUSH Remix on Thingiverse and just wanted to Share this on Printables as well.
I recently built the LACK enclosure for my Prusa Mk3S. I like it but I hate the fiddling required to put spools of filament onto the included filament holders. So I decided to make a new remix of the spool holders I use for all my other…
Anyone who has a Tushy Bidet knows that the knob is hard to twist. This is a better version.
I just receive the MMU2S (my journey is starting… I know) so I need to adapt my workspace. I love this sliding remix of the TUSH2 ( here ) and I used it as my main spool holder for all my print but some detail were bothering me so I…
Remix of TUSH spool holder for EIBOS Easdry. This version can fit more spools because it centers them around the fan. As stated in the original the 608 bearing would not fit. This version uses 3x10x4 bearings . Parts used: bearing 3x10x4…
Works perfectly on Trident 300 and above You can put 2 spools, one on each side. In theory, Trident 300 can be used with 4 spools inside. I haven't checked the 250 size, but it would probably work. The difference between 250, 300, and 350…
After printing the TUSH One Piece it was great but my cardboard spools like to roll into the edge so I ended up adding 8mm wide bearing roller guides so the spools have nowhere to go. Unfortunately that meant they no longer fit through…
The original 3mm walls of the TUSH (The Ultimate Spool Holder) were way too thick to fit inside of the generic cereal boxes I had while using a 68mm wide Bambu spool. The walls in this remix are 1.4mm, with added reinforcement along the…
The original remix uploaded by Fercik was good, but made some modifications. The spool holder no longer requires washers and the spools will stay on the bearings as they had a tendency to fall off with Fercik‘a version. This version uses…
Inspired by https://www.thingiverse.com/thing:4075277 but remodeled from ground up with sleeker looks and almost half the plastic usage. This is designed to fit 2 TUSH and thus making a really good spool holder with adjustable width.
This is a mount designed for the TUSH in combination with Colorfabb 750 gram spools. It is of course possible to use this mount for other spools, as long as the width/thickness of the spool is about the same as Colorfabb's 750 gram…
I tried many different variations of a dry box spooler system. All the ones with printed rollers caused the spool not to roll correctly. The ones with metal shafts caused the spool to become misaligned and not stay centered. Every design…
Remix of the excellent Universal Filament Drybox with Tush++ from kageiit on Thingiverse. https://www.thingiverse.com/thing:5138492 Fits most manufacturer's single 1Kg spools or smaller spools using the adjustable base No supports needed…
The spool holders provided with the Prusa MMU2 leave much to be desired in terms of space usage and ease of switching/loading filaments. I happened to have a few Tush spool rollers printed which I daisy chained to create one long 5 spool…
This is yet another remix of the marvellously minimalist Spool Holder by filamentry but with a stability\mounting tab added. You will still need 2 bearings per assembly. I purchased mine here:…
The frame dimensions on my Maker Select Plus were a bit smaller than the "TUSH - The Ultimate Spool Holder - with clips for Wanho Duplicator i3 Plus" by Silverquark, so I made a new one based on the snap together TUSH spool holder. This…
Added a locating pin and hole to ease glue up. Also increased the bar opening half a mm to accommodate my 8mm thick bars
The EasySlider TUSH I've been running the original TUSH (The Ultimate Spool Holder) with one of my own quick n dirty mods for several years now, and have put thousands of metres of filament through it with no issues of spools falling off…
Remix of the TUSH++ Spool holder TUSH++ by cdeerinck - Thingiverse based on TUSH TUSH - The Ultimate Spool Holder by filamentry - Thingiverse I have been using the TUSH spool holder for a while and given my setup have been rather…
This model is remixed from: https://www.thingiverse.com/thing:2917729 The TUSH spool holder is here: https://www.thingiverse.com/thing:2047554 I found out the hard way that it barely didn't work on my printer, and decided to at least put…
I made the TUSH One Piece which is great, but found my cardboard spools liked to roll into the edge so I ended up making these 8mm wide bearing roller guides. The only downside is that they don't fit through the bottom slot so bearings…
I really liked the TUSH FT rails but they moved around a bit to much so decided to make a support rails to be able to hold them parallel in a better way. I was inspired by https://www.thingiverse.com/thing:2591850 but did not want to…
Remix from https://www.thingiverse.com/thing:2521463 , which apparently was derived from https://www.thingiverse.com/thing:2047554 : a great spool holder where the rims of the spool sit on 2 ball bearings on either side. Printed parts and…
Update 02/08/2023: No Support anymore at screw holes, i use the technique that i saw in Voron design screw holes I just really like mini TUSH 110mm design and i redraw it, add some holes at bottom for screws, make it thicker, and add…
I included a version with a poop emoji embossed on the top, and one with a blank surface. The knob is friction fit onto the dial. I included the Fusion360 file if you'd like to remix! I printed mine at with the 0.15 mm detail PrusaSlicer…
This is the adjustable sliding slotted fastener mount thing for a Tushy Classic/Basic 2.0 bidet. There should be two, but if you're missing one, you can use this to keep things from sliding around.
This is a remix of The Ultimate Spool Holder. I have added a base to make it more stable. To have a working spool holder, you need : Print "TUSH_Sur_Base_v1.stl" => x2 Print "TUSH_Sur_Base_axe_Roulement_v1.stl" => x2 608 bearings => 4 The…
This is a remix of the TUSH2 spool holder by spongybob1958 to replace the spool holder on top of the Wanhao Duplicator i2. It makes it easy to use spools with varying sizes and inner diameter. Also included is my remixed spool holder arms…
Print the guiding rims and axles with 5 walls and 50% infill. For a whole set of two spoolholders, print 2x base 4x axle 4x rim The rims and axles should be a tight fit, but not need excessive force to be pushed over the bearings re. into…
Thanks for the TUSH Ultimate Spool holder by Filamentry that I found on Thingiverse. https://www.thingiverse.com/thing:2047554 My print uses the holders. Easy to install. I use these holders on the top of my Ikea Lack Prusa Printer…
This is a remix of the classic TUSH. With the following changes: · Downscaled, allowing 120x120mm machine (e.g. Voron 0.1) to print. · Adjustable and lockable rails. Assembly: · Four M3×5 or M3×6 screws and nuts. · Four M3 screws with…
It is currently available in 3 versions (if you need another one that is not yet available, just write me): 40mm / 46mm or Univerval, that means everything between 40 and 46mm ATTENTION: For Universal you need a customized version of the…
This is a simple guide frame for the excellent “TUSH - The Ultimate Spool Holder” by filamentry , suitable for filament spool widths ranging from 34mm to 68mm. It is a snug fit so you might need to use some mild force to insert the actual…
Didn't like how smooth the original knob that came with my tushy was so I made one myself that has more grip to it I also changed the indicator on top so that it is more easily visible than the original was
I love the TUSH and have been using it for a long time. However, there are some issues with the design. Mainly, it keeps falling over, sometimes my spools roll off the edge (when they're lighter) and the spools end up rubbing the edges of…
Inspired by a fellow TUSH remixer ( https://www.thingiverse.com/thing:4878164 ), I created some flat-bottomed rails for the spool holder to clip in to, creating a stable platform for your filament spools. I also created a tray for holding…
Loved the Tushy Bidet knob from Howler117 because it connected directly to the stem of mechanism directly. I wanted to add a knob to be able to have more control over the water pressure because the water pressure going to the bidet is…
An even more scaled down version of the TUSH. I modified this design to work with the Mainstays 18.5 cup container. No supports required, using the neat hole trick from the Voron design team. All models should be oriented correctly for…
if you want to get TUSH holder, of cause you can get in this site : https://cafe.naver.com/makerfac/145658 Thanks to the original creators for their good work.
This is a simple 2 part device that you can attach to the inside of your Tush Spool Roller Supports. Just print it, no supports, and then attach using Loctite 406, just like in my pictures. It allows for the use of reels from 45mm width…
Yet another CR10 remix for the CR10\CR10S Control Box. This is yet another remix of the marvellously minimalist Spool Holder by filamentry but with a stability\mounting tab added. You will still need 2 bearings per assembly. I purchased…
The original model couldn't fully seat on the frame because of my rear LED bar. This version is a bit slimmer and gives you a small amount of clearance to use both.
===UPDATE February 7, 2024 Print Profile now available: HERE ===ORIGINAL POST Same as the regular TUSH, just shortened to work with the small 250g spools. 608 bearings snap in just fine. Print Settings Printer Brand: FlashForge Printer:…
A cover that clips onto the knob of a Tushy to prevent accidentally turning it and to keep the toddler from playing with it. Print instructions 0.2mm with supports.
For some reason Tushy's ship with smooth round knobs that can get stuck. I designed one with corners and more grip to it
My filament was not guided well into the extruder. I created this very simple holder to keep the ptfe-tube in place. It's a very simple design and i may have to improve it a bit for better fit and other sizes ptfe-couplers. It's using the…
Just another simple stand for the awesome Tush Spool Holder. Fits both normal (800 g) and XXL (2600 g) Spools of German filament brand DasFilament. Just print the model twice and press fit your TUSH in.
A Stand designed to sit in a filament drybox. the side slots are sized to hold a pair of TUSHes ( https://www.thingiverse.com/thing:2047554 ) far enough apart to hold a typical 1kg spool. the space between is a tray for dessicant pellets,…
Tush the ultimate spool holder but for 626 bearings. Done it in fusion from scratch based on the Tush design. The curves are different, dimensions are slightly different, but it works the same. Printed with PETG and tested, works great…
A large version of TUSH (The Ultimate Spool Holder). When used with the mounts included in the file, you can mount spools of different sizes without having to resize or anything. It uses 608 bearings and is available with a choice of 4/8…
I absolutely love the TUSH ( https://www.thingiverse.com/thing:2047554 ) but the problem is that whenever I have to change filaments, the two independent portions of it would inadvertently shift and I would have to manually adjust their…
This is a remix to add a rounded edge so this can be used with the Tush Spool Holder else it's tight enough to add drag. This ring can prevent under extrusion due to a damaged/bent edge on a cardboard spool. See image. Printed as oriented…
The Tush with the lock for the Lack case. Print one of the part here and 3 of the originals from here: https://www.thingiverse.com/thing:2047554 One part of the spool holder then locks into place with the lock of the case:…
Just have 4 pcs of 607 bearing. A lot of project is for another type so I decided to use them for the TUSH :) Add V2 to smaller base, tight for bearing assembly Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
This is another tush-stand that is made to fit the Add:North 1kg PLA Economy spools.
Tush holder variable width with screwholes for attachment on for example a ikea lack table. or use double sided tape
Yet another TUSH holder specifically designed for 2.5kg filament spools I tried printing it with PETG, but PLA should work just fine
Spool Holder based on the TUSH model for ¼" (6.35mm) ball bearings. These bearings are common in the US. Printed in Overture PETG on a 0.6mm nozzle. Settings are based on the Mk3S/+ 0.6mm nozzle and Prusament PETG config. I add additional…
Print the rollers from the original, print the base, adjust. Mine snapped in place but you can always resize a bit if needed in cura. Since my rolls are mostly uniform I glued mine in place as well so they have a forever home.
Took the general idea of the TUSH, but modeled from scratch, (can't seem to tag as a remix, thingiverse is being thingiverse at the moment). I modeled this right off the fusion file from Creality, so I can't say for sure if it will work…
Print 2 and slot them underneath your TUSH spool holders. This should prevent them from falling over when you move spools. This was designed for Hatchbox PLA spools.
S = 750g Spools M = 1000g Spools like Prusament XL = 2000g Spools
I picked up a 2.5kg filament spool, which arrived with a 100mm-wide spool. My original TUSH++ stabilizers didn't have the width to accommodate this size, so I needed to print longer stabilizers to fit the wider spool. Rather than just…
Models for the filament stand (TUSH++) not included since I didn't modify them. You can go to the referred remix repo for those files. Based on cereal container https://www.amazon.com/dp/B0CFLJCJSF Other parts needed: 608 bearings x 4…
I tried many different variations of a dry box spooler system. All the ones with printed rollers caused the spool not to roll correctly. The ones with metal shafts caused the spool to become misaligned and not stay centered. Every design…
This is simply a thin cover for a 608 bearing with a slight V-slot profile on the outer edge. This can probably be used for many purposes where you use 608 bearings, but this was designed for use with the TUSH (The Ultimate Spool Holder)…
WANTED A BETTER SPOOL HOLDER SO I MERGED THESE 2 DESIGNS https://www.thingiverse.com/thing:4699642
Redesign of my other TUSH using less material and printing faster but nevertheless giving improved stability. Print the guiding rims and axles with 5 walls and 50% infill and a brim for the axles. For a whole set of two spoolholders,…
I have an MMU type system on my printer, so need reverse bowdens to keep things from tangling and going everywhere. Thus, I've used this tush++ style reverse bowden clip! Make sure you use support, it only needs to hold up that top lip as…
Had 2 8mm rods left from my old ender 5 and wanted to use them for a spoolholder. Had many TUSH laying around and reused as much as possible. out came this simple support for the 8mm rod. Just push the rod with force in and be happy :)…
This is a remix of https://www.thingiverse.com/thing:2853619 I have made an 8mm hole to go through a threaded rod and place it in my dry box and not use screws only 8mm nuts that you can print to fix it to the rod. No supports Resolution…
Hello, everybody, I did a remix here of the base plate. The measurements on the plate are the distances from the rolle
I designed a base that specifically is made to fit in the 21 cup rubbermaid drybox. This also is using the TUSH system by filamentry and the PTFE guide by mp42 (both models linked below). I also added holes to use M3x30mm screws and M3…
A stand for the TUSH spool holder. I made this model as the way I had my filament it would make the TUSH slide or fall apart, and a lot of other designs dont have a back on the stand and aren't as easy to put screw holes in. I made a…
holds the TUSH spool holders at a 60mm width (60mm at the middle of each bearing). Print Settings Printer: Twotrees Sapphire Plus Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: Any Any Category: 3D Printer Accessories
Remix du célèbre TUSH ( The Ultimate Spool Holder). Modification du dévidoir avec l'ajout d'un endstop pour controler le soulevement de la bobine dans le cas de présence d'un noeud dans la bobine (Tangling). Grace à ce contact,…
I recently printed some TUSH rollers for use when I didn't want to load up one of my dryboxes with filament. They're elegant, but the stability leaves something to be desired. I saw a stabilizer foot on Printables (credit at bottom) and…
added braces to allow the spool holder to be mounted to the 4040 profile on the wanhao Duplicator 9 added 5mm holes to make sure the pieces are held together as they are floating more than originally intended and added 5mm holes to the…
This is a slightly modified Voron internal spool holder based off of Resizable TUSH. This make only includes the modified bits and not the “slide” and the bowden tube holder. Those can be found on the parent design's page. You will need:…
I liked denos' TUSH remix https://www.thingiverse.com/thing:2537713 on my haribo and bear, so used his onshape link to make one that fits my mk3 clone frame. Included a copy of his side for convenience. Print Settings Printer: Mk3s Bear…
Just a couple of basic blocks I made to stop my tush holder from sliding around. There are many out there that are better than this one but I just wanted to learn 3D modelling and it does the job :) Tush spool holder:…
I just resized the design to make it fit with the alfawise U20 control module
I wanted to be able to create a dry box that could hold multiple spools and dispense from them at the same time. The legs on the original left a lot of space between spools when placed side by side. I designed this to reduce the waste…
Simple mod to the original by adding threads for a PC4-M10 fitting on the bottom piece and cutting holes into the solid parts to minimize filament usage. Modified in Shapr3D from the original .stp files. I printed it in Overture Black…
This is a remix of an Adjustable TUSH-style spool holder with a scissor mechanism by John Edwa ( https://www.thingiverse.com/thing:3200511 ). I had a need of adding multiple pools for a drybox canister that I got. With this remixed part,…
This is designed for Colorfabb 2.2kg spools (same as Prusa 2KG NGEN spool). They have a 30cm diameter and 10cm width. Feel free to ask for a specific size if you like the design. After having tried a few TUSH designs, I found that they…
UPDATE: I uploaded a modified FreeCAD source that is all parametric now, meaning you can enter the values for thickness, height, spool span etc into a spreadsheet and the model will get recomputed accordingly. I found and fixed a few…
