1 / 3
Skinny TUSH++
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A reinforced TUSH++ (The Ultimate Spool Holder) with thinner walls for 608 bearings.
- Rating
- 4.667 / 5
- Likes
- 26
- Downloads
- 110
- Makes
- 3
- Views
- 604
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
- The original 3mm walls of the TUSH (The Ultimate Spool Holder) were way too thick to fit inside of the generic cereal boxes I had while using a 68mm wide Bambu spool.
- The walls in this remix are 1.4mm, with added reinforcement along the bottom to keep it strong despite the thin walls.
- It's compatible with TUSH++ rails. Since the walls are thinner, it wobbles a little bit on the rails. If this is a problem, the wedges can be used for extra support.
Instructions
- All items can be printed without supports.
- I used a 0.4mm nozzle with 0.2mm layer height on a Bambu P1S.
- Assemble using 4x 608 ball bearings that snap into the pegs.
- The .f3d file is included if you need to change the thickness or if the bearing pegs need to be modified for your printer.