Tush Filament Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The spool holders provided with the Prusa MMU2 leave much to be desired in terms of space usage and ease of…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 72
- Makes
- 0
- Views
- 1,074
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
The spool holders provided with the Prusa MMU2 leave much to be desired in terms of space usage and ease of switching/loading filaments. I happened to have a few Tush spool rollers printed which I daisy chained to create one long 5 spool holder. This guide clips securely onto the existing Tush tracks from several designs. Make sure to print this with supports as the overhang needs it.
I needed to replicate the functionality of the provided "festo" holders so that filament would not tangle during retractions so I made these simple filament guides which use a small length (~50mm) of ptfe tube. If the tubing is not secure use a small piece of paper on the inside of the hole and then insert the tube. I had varying degrees of secureness and the paper made them very snug.
Works great as a combo with my lack ptfe tube guide: https://www.thingiverse.com/thing:3129101
Using them after days of MMU2 printing has resulted in zero tangles or the guide coming off the track.
Category: 3D Printer Accessories