Tush Filament Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The spool holders provided with the Prusa MMU2 leave much to be desired in terms of space usage and ease of…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 1074
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
The spool holders provided with the Prusa MMU2 leave much to be desired in terms of space usage and ease of switching/loading filaments. I happened to have a few Tush spool rollers printed which I daisy chained to create one long 5 spool holder. This guide clips securely onto the existing Tush tracks from several designs. Make sure to print this with supports as the overhang needs it.
I needed to replicate the functionality of the provided "festo" holders so that filament would not tangle during retractions so I made these simple filament guides which use a small length (~50mm) of ptfe tube. If the tubing is not secure use a small piece of paper on the inside of the hole and then insert the tube. I had varying degrees of secureness and the paper made them very snug.
Works great as a combo with my lack ptfe tube guide: https://www.thingiverse.com/thing:3129101
Using them after days of MMU2 printing has resulted in zero tangles or the guide coming off the track.
Category: 3D Printer Accessories