Super Low Profile TUSH - Spool Holder (30x10cm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is designed for Colorfabb 2.2kg spools (same as Prusa 2KG NGEN spool). They have a 30cm diameter and 10cm width.…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is designed for Colorfabb 2.2kg spools (same as Prusa 2KG NGEN spool). They have a 30cm diameter and 10cm width. Feel free to ask for a specific size if you like the design.
After having tried a few TUSH designs, I found that they are generally a little unstable and will sag under heavy load. I also needed as low a profile as possible.
I designed this to be stronger than you'll ever need and run smooth while avoiding sag after long term use. The spool sits 3mm above the floor.
Print 1 main body and 4 bearing holders.
You need the following to put it together:
4x 608 Bearing
4x M4 nut
4x M4x18 (or longer)
4x M4 washer (no required)
UPDATE 31.08.2018 - I smoothed out the design of the holder and reduced the plastic used quite a bit while maintaining the rigidity
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Category: 3D Printer Accessories