1 / 3
TUSH one piece - Multi-spool (printed rims and axles) — image 1
1 / 3

TUSH one piece - Multi-spool (printed rims and axles)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Double-wide spool holder to allow multiple spools sitting close together.

Rating
0 / 5
Likes
6
Downloads
19
Makes
0
Views
207
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

I wanted to be able to create a dry box that could hold multiple spools and dispense from them at the same time. The legs on the original left a lot of space between spools when placed side by side. I designed this to reduce the waste space when storing multiple spools side by side. It is meant to be used with one of the original single axle model on each side.

I printed in PLA, but you may want to print in something stronger and more heat resistant. If you have trouble getting the parts together, scale the axles down if they are hard to get into the bearing, scale the body up if the axles don't fit the body but do fit the bearing, and scale rims up if the bearings are hard to insert. One or two percent should be all you need.

I used the absolute cheapest 608ZZ bearings I could find on Amazon. Quality of the bearings isn't an issue, since they will never take the abuse they would on a skateboard.

Tree supports recommended on the body for the axle holes. You may also want to ream them out with a 5/16" drill bit.

Tags