1 / 1
TUSH Spool Holders Adapted for 1/4" ball bearings.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model is the TUSH holder scaled to 80% for press fit in 1/4" (6.35mm) ball bearings
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 29
- Makes
- 2
- Views
- 228
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
Spool Holder based on the TUSH model for ¼" (6.35mm) ball bearings. These bearings are common in the US.
Printed in Overture PETG on a 0.6mm nozzle. Settings are based on the Mk3S/+ 0.6mm nozzle and Prusament PETG config.
I add additional perimeters for high strength prints - use 3-6 perimeters to get at least 1.5mm total perimeter width (3 for 0.6mm nozzle, 4 for 0.4mm, 6 for 0.25mm). The print will likely be solid anyways due to top/bottom layers.