1 / 4
Nederlandse Spoorwegen 2412 - Spoor 1 / 1:32 — zdjęcie 1
1 / 4

Nederlandse Spoorwegen 2412 - Spoor 1 / 1:32

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nederlandse Spoorwegen 2412 - Spoor 1 / 1:32

Ocena
4 / 5
Polubienia
44
Pobrania
585
Wydruki
0
Wyświetlenia
2613
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

After the second world war Alsthom (still with the letter “H” in the name) build 130 diesel electric locomotives for the Nederlandse Spoorwegen (Dutch state railways).

They were based on a standard for locomotives in France and the French colonies, OFEROM, Office Central des Chemins de Fer d'Outre-Mer (Central Office for Overseas Railways).

https://nl.wikipedia.org/wiki/NS_2400

After being decomissioned, several locomotives were bought by the French State Railways SNCF. They were used for hauling loads to and from construction sites on the French High Speed Lines. When this deployment ended, a Belgian construction company bought the surplus locomotives. Several of these made it back to the Netherlands again for a new career. (amongst others #2412, 2424 and 2454).

This is my interpretation in Gauge 1 (1:32) of locomotive #2412.  This locomotive is repainted in the initial blue livery and preserved at the Veluwse Stoomtrein Maatschappij (https://stoomtrein.org/collectie/ns-2400-2500-serie/). Currently (spring 2024) this locomotive is not operational. 

 

Bill of materials (non conclusive):

 

Qty

Item

Position/remark

2

JGA25 motors

i.e. 6V/1000 rpm

4

wheelset

axle diameter 3 mm, wheel diameter 30 mm i.e. Märklin or LGB

2

M2 grub screw 5 mm

to attach bevel gears to motor shafts

4

M3 flathead screw 15 mm

to attach motor brackets to bogies

4

M3 tapered screw 5 mm

to fit motors to motor brackets

12

M2 tapered screw 15 mm

to attach bogie sides to bogies

8

bearing i.d. 3 mm, o.d. 6, 2.5 mm high

to fit wheel sets to bogie sides

12

M3 tapered screw 25 mm

to attach cabin and engine covers to frame

2

M3 threaded rod 30 mm

to allign the two frame pieces before applying glue

4

M2 flafhead screw 25 mm

to attach buffers to buffer beams

4

 spring 10 mm

salvaged from a ballpoint pen to created sping loaded buffers

2

M5 screw 30 mm

to mount bogies to the frame

2

spring i.d. 6 mm o.d. 9 mm 10 mm long

fit to bogie mount to push bogies to the frame

2

washers 5.5 mm i.d. 10 mm o.d.

(between M5 screw en spring to mount bogie

n.a.

1.75 mm filament

used as dowels to allign the parts of the engine covers before applying glue

4

brake hoses 

i.e. Märklin, Hübner or Dingler

4

Coupling hooks

i.e. Märklin, Hübner or Dingler

4

Warm white LED 3.5 mm

 

4

Red LED 3.5 mm

 

n.a.

C.A. Glue 

between engine cover parts and to mount several items inside the cab

n.a.

Paint

Red, grey, black & blue (blue = RAL5015)

n.a.

RC gear

i.e. ESC for brushed motors, RC receiver and batteries

 

 

 

Please contact me in case you've got questions concerning building this locomotive.