Nederlandse Spoorwegen 2412 - Spoor 1 / 1:32
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nederlandse Spoorwegen 2412 - Spoor 1 / 1:32
- Rating
- 4 / 5
- Likes
- 44
- Downloads
- 585
- Makes
- 0
- Views
- 2,613
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After the second world war Alsthom (still with the letter “H” in the name) build 130 diesel electric locomotives for the Nederlandse Spoorwegen (Dutch state railways).
They were based on a standard for locomotives in France and the French colonies, OFEROM, Office Central des Chemins de Fer d'Outre-Mer (Central Office for Overseas Railways).
https://nl.wikipedia.org/wiki/NS_2400
After being decomissioned, several locomotives were bought by the French State Railways SNCF. They were used for hauling loads to and from construction sites on the French High Speed Lines. When this deployment ended, a Belgian construction company bought the surplus locomotives. Several of these made it back to the Netherlands again for a new career. (amongst others #2412, 2424 and 2454).
This is my interpretation in Gauge 1 (1:32) of locomotive #2412. This locomotive is repainted in the initial blue livery and preserved at the Veluwse Stoomtrein Maatschappij (https://stoomtrein.org/collectie/ns-2400-2500-serie/). Currently (spring 2024) this locomotive is not operational.
Bill of materials (non conclusive):
Qty | Item | Position/remark |
|---|---|---|
2 | JGA25 motors | i.e. 6V/1000 rpm |
4 | wheelset | axle diameter 3 mm, wheel diameter 30 mm i.e. Märklin or LGB |
2 | M2 grub screw 5 mm | to attach bevel gears to motor shafts |
4 | M3 flathead screw 15 mm | to attach motor brackets to bogies |
4 | M3 tapered screw 5 mm | to fit motors to motor brackets |
12 | M2 tapered screw 15 mm | to attach bogie sides to bogies |
8 | bearing i.d. 3 mm, o.d. 6, 2.5 mm high | to fit wheel sets to bogie sides |
12 | M3 tapered screw 25 mm | to attach cabin and engine covers to frame |
2 | M3 threaded rod 30 mm | to allign the two frame pieces before applying glue |
4 | M2 flafhead screw 25 mm | to attach buffers to buffer beams |
4 | spring 10 mm | salvaged from a ballpoint pen to created sping loaded buffers |
2 | M5 screw 30 mm | to mount bogies to the frame |
2 | spring i.d. 6 mm o.d. 9 mm 10 mm long | fit to bogie mount to push bogies to the frame |
2 | washers 5.5 mm i.d. 10 mm o.d. | (between M5 screw en spring to mount bogie |
n.a. | 1.75 mm filament | used as dowels to allign the parts of the engine covers before applying glue |
4 | brake hoses | i.e. Märklin, Hübner or Dingler |
4 | Coupling hooks | i.e. Märklin, Hübner or Dingler |
4 | Warm white LED 3.5 mm |
|
4 | Red LED 3.5 mm |
|
n.a. | C.A. Glue | between engine cover parts and to mount several items inside the cab |
n.a. | Paint | Red, grey, black & blue (blue = RAL5015) |
n.a. | RC gear | i.e. ESC for brushed motors, RC receiver and batteries |
Please contact me in case you've got questions concerning building this locomotive.