1 / 2
Prusa XL Spool holder with bearings that fits with 3dupfitters enclosure — zdjęcie 1
1 / 2

Prusa XL Spool holder with bearings that fits with 3dupfitters enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Prusa XL spool holder with 608 bearings meant to fit with the 3dupfitters enclosure

Ocena
5 / 5
Polubienia
14
Pobrania
80
Wydruki
2
Wyświetlenia
1447
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I've almost always used spool holders with 608 bearings to reduce the drag when the filament is pulled off the spool.  For my MK3(now MK4) printers I used a modded version of this one(https://www.printables.com/model/174620-filler-filament-holder)
 

I wanted something similar for the XL that would take the larger spools.  I also needed something that would work with the 3dupfitters enclosure for the XL that would keep the acrylic sides pressed against the frame.  So I created this one.

What to print:

Left-front x 2

Left-rear x 1

Right x 2

Spindle_r2 x 5 OR Spindle_r3 x 5 OR Spindle_r4 x 5

Each spindle uses two 608 bearings.

 

Update 2024/01/20, added a Spindle_r4 with even more taper that should make spools want to stay centered

Update 2024/01/18, added a Spindle_r3 with more taper that should make spools want to stay centered

Tagi