Prusa XL Spool holder with bearings that fits with 3dupfitters enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prusa XL spool holder with 608 bearings meant to fit with the 3dupfitters enclosure
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 80
- Makes
- 2
- Views
- 1,447
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I've almost always used spool holders with 608 bearings to reduce the drag when the filament is pulled off the spool. For my MK3(now MK4) printers I used a modded version of this one(https://www.printables.com/model/174620-filler-filament-holder)
I wanted something similar for the XL that would take the larger spools. I also needed something that would work with the 3dupfitters enclosure for the XL that would keep the acrylic sides pressed against the frame. So I created this one.
What to print:
Left-front x 2
Left-rear x 1
Right x 2
Spindle_r2 x 5 OR Spindle_r3 x 5 OR Spindle_r4 x 5
Each spindle uses two 608 bearings.
Update 2024/01/20, added a Spindle_r4 with even more taper that should make spools want to stay centered
Update 2024/01/18, added a Spindle_r3 with more taper that should make spools want to stay centered