Ikea Train Bridge Support - Angled Rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the original with rails that don't require any supports when printed on its side.
- Ocena
- 4,818 / 5
- Polubienia
- 108
- Pobrania
- 517
- Wydruki
- 11
- Wyświetlenia
- 2414
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Share Alike
Background
I wanted to print the original with rails however because of the fillets they would require supports or would print with droops. I used the provided f3d file to slightly narrow the bridge and instead use a chamfer on the rails so they print without supports and fit snugly under the track to keep it in place during play.
Print Instructions
You'll need to print 2 to make the complete bridge and they can be printed as oriented in the files and require no supports. I printed mine with 10% adaptive cubic infill on .25mm layers and it's plenty strong.