1 / 4
Spiral Ornament by PRNTR3D - Super Easy Print - Vase Mode
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very easy but amazing to look at, and strong spiral ornament. The tips wont break off with this model :)
- Ocena
- 4,991 / 5
- Polubienia
- 1866
- Pobrania
- 7711
- Wydruki
- 127
- Wyświetlenia
- 22 493
- Oceny
- 110
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 127) (Komentarze: 182)Remiksy (2)Kolekcje (2655)Powiązane
Dont forget to post your makes!
I use the following settings to print this model with a hole for hanging:
- Orientation: Top
- Brim: 5mm
- Mode: Vase
- Bottom layers: Enough to get two layers into the spiral, about 40 for 0.3mm or 60 for 0.2mm layer heights. This only costs an additional 2-3 grams of material.
- Cooling: set lowest speed to 3mms
The stl file is scaled to 120mm in height and 58mm in both X and Y dimensions, but the 3mf file is not. You can adjust the scale according to your preference. I have printed them at 12% scale and they worked well.