1 / 4
Spiral Ornament by PRNTR3D - Super Easy Print - Vase Mode
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A very easy but amazing to look at, and strong spiral ornament. The tips wont break off with this model :)
- Rating
- 4.991 / 5
- Likes
- 1,869
- Downloads
- 7,746
- Makes
- 127
- Views
- 22,600
- Reviews
- 110
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
Dont forget to post your makes!
I use the following settings to print this model with a hole for hanging:
- Orientation: Top
- Brim: 5mm
- Mode: Vase
- Bottom layers: Enough to get two layers into the spiral, about 40 for 0.3mm or 60 for 0.2mm layer heights. This only costs an additional 2-3 grams of material.
- Cooling: set lowest speed to 3mms
The stl file is scaled to 120mm in height and 58mm in both X and Y dimensions, but the 3mf file is not. You can adjust the scale according to your preference. I have printed them at 12% scale and they worked well.