Anthropomorphic robot figure on magnets 1:12 scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Robot - great action figure that can be broken into pieces and assembled back again in a seconds!
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 600
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
Purchase 10 8x2mm round neodymium magnets.
For example: https://www.aliexpress.com/item/1005004770506898.html
1mm thinness magnets are too week, but I have included STLs for for this case too.
will provide weaker robot.
Print recommendations:
Depending on what thickness are your magnets pick STLs with suffix “_2mm” or “_1mm”.
All parts can be printed using any filament type and any layer height. No supports required.
Assembly instructions:
Glue magnets into printed figure parts using super glue.
Choose polarity of the magnets so that each part could be put anywhere.
P.S.
Other models that you see on the pictures can be found on my models page: https://www.printables.com/@Elitail_238721/models
P.P.S.
If you like this model, feel free to download it and print!
P.P.P.S.
If you will print this model, please post a make. Thanks!