1 / 4
Print in Place (PIP) Bag Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very easy and fast print to make sure your food doesn’t go bad! Keep that food fresh!
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 319
- Wydruki
- 4
- Wyświetlenia
- 1270
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 7)Remiksy (0)Kolekcje (76)Powiązane
Keep all your bagged food fresh using this super strong, print-in-place, quick printing bag clip.
- Do not print with supports
- Integrated guiderails (45 degree) keep spring from sliding out of the housing.
- Once removed from build plate, it most likely won’t be tight, but if it is just squeeze it a few times and it will loosen to just the right tension.
Final result is a strong printed spring that will retains it tension for a long time.
- the normal one is printed with normal tolerance and should be able to be printed
- i printed these on my ender 3 pro with basic cura settings
- if you‘re worried about tolerance issues print the one with higher tolerance but I suggest not due to the spring will want to spring out and will not be guided as easy along the guide rail
- printed perfectly on ender 3 pro
- .28 layer height
- 75mm/s
If you enjoy the model, please download and like it, share your build pictures, and share to others ;D
Also if you have any ideas or have questions feel free to ask
you can also send me any suggestions for improvements!