1 / 9
Avalanche Probe Clip Stick
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapt your Avalanche Probe for another use off season! Designed for Mammut Speed Lock Carbon Probe.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 410
- Wydruki
- 2
- Wyświetlenia
- 2665
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- BSD License
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (3)Kolekcje (41)Powiązane
I designed this as i already had an avalanche Probe but no clipstick before possibly spending the money on one.
Features:
- ellipticaloptician's plate (remixed) design allows you to place and retrieve quickdraws
- Fits many carabiner shapes and sizes (tested with “Petzl Ange S” - “Petzl Attache”)
- Adapter and neck allow for more movement
Compatibility:
Designed for “Mammut Carbon Probe 280 speed lock” and fits quite snug, check the dimensions for use with different probe:
- 13.6mm pole dia.
- 14.2mm max head dia.
Required Hardware:
- 2x M6x25mm hex bolt
- 2x M6 wing/thumb nut
- 2x M3x10-15 bolt
Optional Hardware:
- 2x M3 threaded insert
Printing:
- I Printed all parts in PETG an with 0.6mm nozzle dia.
- Recommend solid infill or thick walls.
Probe Adapter:
- 2 versions available:
- “M3 insert” designed for M3 threaded inserts (by cnckitchen)
- “no insert” designed to screw directly into the print (2.4mm holes).
- Print with clamping bolts and slot facing up
- Recommend support inside
- Recommend support on the large radius:
Neck:
- Recommend support on the large radius:
Binerplate:
- Recommend printed standing with brim:
