2020 Optical Endstop Switch & Cover Mount - SeeMeCNC Delta Printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An optical switch mount and cover for 2020 aluminum extrusion
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this Optical End Stop Switch mount & carriage flag to fit my 2020 delta printer. I also made a cover to fit over the switch to help prevent stray light affecting the sensor.
The printer started as a FolgerTech Kossel, which I upgraded to the SeeMeCNC Ball Cup Arms. Originally it used mechanical micro-switches as tower endstops; the switch to optical switches seems to provide a lower SD when running a G33 command, and there is no physical contact with the switch. The optical switches I used are made by Lerdge; specs and photo is included.
I also included the file for the carriage to work with LDO MGN 12H linear rails. These use 3mm hardware.
Make sure you run a new G33 and G29/Mesh Bed Level.
If you like my designs and want to send me a tip, you can do so via PayPal….. Thank you and enjoy the models I create.