VzBot-style electronics enclosure panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collection of panels for VzBot, HevORT, or other builds that can be used to build an enclosure for the electronics bay
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 1504
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A collection of panels for VzBot, HevORT, or other custom 3D printer builds that can be used to build an enclosure for the electronics bay. The panel width is identical to the width of many standard PSU enabling the use of PSUs as part of the enclosure wall, VzBot-style. These panels have been remixed from the great work by Simon Vez and can be used for a multitude of applications. Several versions are included such as a retangular panel, a panel with space for a IEC320 power inlet, a volt meter panel and a panel with a hole for an umbilical or other cable outlet. There is a split umbilical sleeve included that can be printed in TPU to provide a clean cable exit. The voltmeter panel is sized for generic small volt meters available through eBay, Amazon, Ali, etc. check the size of the hole before ordering. They snap in and should not need glue or otherwise.
Parts can be printed flat on the bed without supports.