Little Sleigh /Kleiner Schlitten , Christmas Decoration
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tiny Sleigh for Christmas decoration. Ein kleiner Schlitten als Weihnachtsdekoration.
- Ocena
- 4,875 / 5
- Polubienia
- 160
- Pobrania
- 912
- Wydruki
- 9
- Wyświetlenia
- 2521
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Beautiful little sleigh for decoration of Christmas presents, Advent wreaths, Christmas trees or even for Christmas elf stories, etc...
Left and right side of the sleigh are identical. However, in case of textured plate it may be nicer to position the sides as shown in above picture, so that the outer sides have the same structure.
Size
- LxWxH: approx. 65 x 30 x 15 mm
Print parameters:
- Layer height: 0.2
- Nozzle: 0,4 mm
- Supports: No
- Brim: No
- Material: tested with PLA, but I think PETG should also fit
- The 3mf files were generated with Bambu Studio
In case you use other slicers please use the stl files
Post-printing
After printing, the parts can simply be put together by clamping.
A piece of filament (1,75) can be used as crossbar.
The clamping of the parts should actually be sufficient. If necessary, use a drop of superglue.
The uploaded example is printed with PLA filament in white from “Das Filament”
I would be very happy about a make, a like or a comment!
I wish you a Merry Christmas!