Improved screw mount for Tuya TH02Z Zigbee thermometer/hygrometer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original baseplate only accepts extremley small screws, which I did not have on hand.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 708
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I had issues with the original baseplate only fitting very small screws due to very little clearance for the batteries. I wanted to be able to use some generic 3mm wood screws which are very easy to come by, so I designed a new baseplate with a fitting fillet for the new screw size.
You should print the “anchors” for the thermometer with supports, I didn't try without. They were really easy to remove, so I did not bother to test without them.
Clearance should be no issue on a halfway calibrated printer, fits mine very nice with just enough friction.