V-Minion - WobbleX adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple piece to adapt minion to WobbleX
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 128
- Wydruki
- 1
- Wyświetlenia
- 1190
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This upgrade uses wobbleX in the intended way, unlike the version in the WobbleX Git repository and here on Printables.
Simple 1:1 swap with the pre-tension nut V-Minion comes with. Note that this is not a miracle wobbly boi and you will have to have lead screw aligned decently anyway.
You need regular POM TR8x4 nut such as this one https://www.aliexpress.com/item/32920686035.html
You (most likely) need extrusion cap with 608 bearing such as this one https://www.printables.com/model/675495-v-minion-sfs-wobblex-cap
Original Cable holder will fit. It is not in the photos because it would cover everything else.
The lead screw included in RR V-Minion kit it a bit shorter than it could be. You will have to pull it up a bit from the bottom coupler.