Adapter for Eve Motionblinds Upgrade Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom adapters to fit roller shades with an ID of 30mm.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 649
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
I purchased Eve Motion Blinds which support Thread (and Matter as of Dec 2023): https://www.evehome.com/en-us/eve-motionblinds
However, they only support roller blinds with an OD of 38-51mm. I only realized after purchase that my rollers were 30mm ID so the included adapers were too large and would not fit. I created these custom adapters to fit my blinds.
You will need to print one of each (left endcap, right endcap, motor cap). Once printed, you can replace the stock hardware with these. No additional hardware is required. For how to install the original parts: