American Morse Equipment keyer base and leg strap attach plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lightweight base and leg strap attachment plate for American Morse Equiepment keyer
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a way to hold down my keyer, especially since this AME key has exposed parts that make it difficult to support with the other hand. The base allows a passthrough for the cable or installation of an audio jack, and then can be detached from the leg strap plate. I also have a hole in the bottom side of the base plate for a 2.54cm x 3.96mm magnet I found at my local hardware store.
11 Dec Update:
I might have been a little hasty in publishing. During assembly I found an issue with clearance between the audio plug and the screws on the bottom of the keyer. The file has been updated.